Skip to Content

Analysis of well water vs. water from the public water supply

Water from a well and water from a public water supply may look the same at first glance. The difference lies mainly in how its quality is ensured and monitored.

In a public water supply, there is a monitoring system from the water source through treatment and distribution. In the case of a private well, no such continuous system is automatically implemented for households. If you want to use water from the well for drinking and food preparation, its current quality cannot be reliably assessed based solely on appearance, taste, or smell.

What is the main difference between a well and a public water supply?

The public water supply is a system for mass provision of drinking water. Slovak legislation sets requirements for the quality of drinking water, monitoring, and risk management. The owner of the public water supply also has obligations regarding the monitoring of water quality during its extraction, accumulation, treatment, and transportation to the consumer.

A private well operates differently. It is an individual source, where the homeowner does not have the same continuous monitoring system as with public supply.

It is therefore important for the user to distinguish between two questions:

  • where the water comes from,
  • who and how continuously checks its quality.

The origin of the water alone does not indicate what the result of a specific analysis will be.

How is the water from the public water supply monitored

Drinking water supplied by public water systems must meet the requirements established by the relevant legal regulations. The law also requires the owner of the public water system to ensure the monitoring of water quality according to the monitoring program and to publish appropriate and up-to-date monitoring results on their website.

The Regulation of the Ministry of Health of the Slovak Republic No. 91/2023 Coll. regulates, among other things, the indicators and limit values for the quality of drinking water, monitoring programs, and risk management of the drinking water supply system.

However, this does not mean that an individual analysis of tap water is never meaningful.

The quality of water at a specific withdrawal point can also be influenced by conditions in the internal plumbing of the building. Therefore, it is important to distinguish between the quality of water supplied by the public water system and the condition of water at a specific location within the building.

When does it make sense to analyze water from a public water supply

Your own laboratory analysis can be useful, for example, when:

  • the color, turbidity, taste, or smell of the water changes,
  • would you like to check a specific issue at the delivery point,
  • You suspect that the result may be influenced by the internal distribution of the building,
  • You need to know specific parameters before selecting a water treatment technology,
  • You are addressing a specific purpose for using water, for which you need more data than what is provided by standard information about public supply.

The scope of the analysis should be based on the reason for which you are testing the water. Not every case requires the same list of indicators.

The situation is different at one's own well

There is no automatic substitute for regular monitoring of the public water supply for households when using a well.

The quality of groundwater can vary, and the appearance of the water may not indicate all possible problems. Clear water without an unpleasant odor does not, by itself, confirm that the water meets all the indicators relevant to its intended use.

If the water from the well is used for drinking or food preparation, laboratory analysis is the fundamental basis for assessing its current condition.

The result of a single sample should be understood as information about a specific sample taken under certain conditions. The WHO emphasizes a broader risk-based approach to drinking water safety management, from source to consumer, rather than relying solely on an isolated laboratory result.

What analysis makes sense for well water

A universal package suitable for every well does not exist.

The scope of the analysis should be chosen according to:

  • purpose of water use,
  • the character and history of the source,
  • local conditions,
  • changes in appearance, taste, or smell,
  • previous results,
  • problems around the well,
  • preparation of water treatment,
  • possible official purpose of the result.

If the goal is to design water treatment technology, it is not enough to monitor only the parameter that is visibly inadequate. The technology may also depend on pH, other substances in the water, flow rate, pressure, and the desired amount of treated water.

The first step is not to choose a filter, but to obtain sufficient data about the incoming water.

The analysis of the well and the water supply should not be interpreted in the same way.

The laboratory can analyze the same indicator in both samples, but the context of the result is different.


Own wellPublic water supply
Water sourceindividual sourcepublic supply system
Ongoing monitoringThe household must address it according to need and purposepart of the supply system and legal obligations
Own analysiskey basis for understanding the current quality of one's own sourcesupplementary tool for a specific question or problem
What can influence the outcomesource, well, surroundings, seasonality, consumption, distributiondistribution network, building distribution, stagnation, place and method of consumption
Next stepinterpretation of results and, if necessary, source verification or proposal for modificationfirst determine whether the problem is related to the delivery or to a specific object

The method of collection can affect the result

When comparing results, it is important to know where and under what conditions the sample was taken.

The result may be influenced by, for example:

  • pickup location,
  • status of the sampling point,
  • water stagnation in the pipe,
  • procedure for collection,
  • used sample book,
  • transport and time for analysis,
  • previous disinfection or intervention in the system.

Therefore, two laboratory protocols cannot be automatically compared without knowledge of the collection conditions.

If the result is to be used for official purposes, it must be done before placing the order. analysis verify the required scope of tests and the method of sampling.

What to do when the analysis is unsatisfactory

An unsatisfactory result does not automatically determine a specific treatment technology.

The correct procedure is:

  1. determine which indicator is not suitable and in what unit,
  2. check the location and method of collection,
  3. consider the water source and the circumstances of the problem's occurrence,
  4. add related indicators as needed,
  5. only then choose an appropriate next step or method of adjustment,
  6. check the result appropriately after the intervention.

When it comes to well water, it is important to distinguish the problem of the source itself from the issues related to the distribution system or the existing water treatment equipment.

In the case of a public water supply, it is important to first determine whether the problem occurs in the supplied water or only in the specific home distribution system.

Summary

The biggest difference between a well and a public water supply is not that one source has to be automatically "better" than the other.

The difference is primarily in the system of control and accountability.

In a public water supply, water quality is part of a regulated system for monitoring and risk management. In the case of a private well, the owner needs to actively assess the condition of their source and choose an appropriate scope of analysis based on the intended use of the water.

If you want to make decisions about water treatment, the laboratory result is just the beginning. The proposal should also include the water source, hydraulic conditions, intended use, and other parameters that may affect the suitability of the technology.

Danum s.r.o